How to add Honeywell Devices to the App

Honeywell HR91

You can now link the Honeywell HR91 radiator valve to the new Lightwave Link Plus App. Please see the instructions below on how to attach the radiator valve and link it to your link plus app:  

Please see below further useful details regarding the HR91 Radiator Valve    

LED Indication Lights.jpg

Lightwave - HR91 Linking Process.jpg

Honeywell DT3R Wireless Thermostat 

To pair the Lightwave Honeywell thermostat to the Lightwave app you must follow the instructions in the same order as below:

APP:

Press add device

Select LINK HONEYWELL HOME DEVICE

Name the thermostat as required (app needs to be ready for the pairing process)

THERMOSTAT:

Long press the physical button

PAr will appear

Toggle down to RF - Press physical button

Then toggle to COn - press physical button

Immediately press LINK on the app

Allow the app to scan and once found assign it to the correct room and hit save/done

If you do not see the COn option you will need to clear the memory of the thermostat 

HOW TO CLEAR THE MEMORY:

Long press the physical button

PAr will appear

Toggle down to RF - Press physical button

Toggle down to Clr - press physical button

Wait 10 seconds, remove the battery and restart the device.

Honeywell DTS92E

Please see the attached PDF for installation guidance to the Link Plus.

DTS92E Honeywell Home Thermostat (Lightwave Instructions).pdf

You can program all Honeywell devices to wirelessly manage your heating system which will be wired  to either our LP92 smart heating switch or any of our relays. This can be achieved by setting up a call for heat automation. For detailed instructions, please click HERE. 

Please do not hesitate to call our Tech support team for further assistance on 0121 250 3625 Alternatively you can submit a support ticket by clicking HERE