Skip to content
  • There are no suggestions because the search field is empty.

Why are my lights flickering, and how can I fix it?

This article provides a detailed, step-by-step guide to diagnosing and resolving flickering lights, helping users identify potential causes, and implementing effective solutions for a stable and reliable lighting experience.

Flickering lights are often caused by compatibility issues or incorrect dimmer settings. Try the following solutions:

  • Check bulb compatibility – Ensure you are using dimmable LED bulbs that are compatible with Lightwave dimmers. We offer tested and recommended bulbs on our website here. 

    Please refer to this article here for a detailed discussion on signs of incompatibility.

  • Adjust the dimmer settings – Use the Lightwave Link Plus app to fine-tune the dimming range (Add Hyperlink)  to match your bulbs.
  • Check load requirements – Verify that the total wattage of your lighting circuit falls within the minimum and maximum load specifications of your Lightwave dimmer. 

    The minimum wattage requirement is 10W without a neutral wire & 5W with a neutral wire. The maximum wattage capacity is 100W for LED bulbs and 250W for halogen bulbs.

Are my bulbs compatible with Lightwave dimmers?

Not all LED bulbs are compatible with dimmers. We recommend using dimmable LED bulbs that meet the minimum wattage requirements (10W) and operate at 230V or 24V. While some tested bulbs are available on our website www.lightwaverf.com, any dimmable LED bulb that meets these specifications will usually work.

⚡ Signs of incompatibility:

  • Flickering at certain brightness levels
  • Not dimming smoothly
  • Turning off unexpectedly

If your bulbs flicker, try Calibrating the dimmer or switching to a different brand or model that is known to work with dimmers.

Can I adjust the dimming range to prevent flickering? (Calibration)

Yes! You can use Calibration Mode in the Lightwave Link Plus app to fine-tune the dimming range:

  1. Open the Lightwave Link Plus app.
  2. Navigate to your dimmer settings.
  3. Adjust the minimum and maximum dimming levels to suit your bulbs.

This can help eliminate flickering by ensuring the dimmer operates within the optimal dimming range.

What should I do if flickering continues?

If flickering persists after trying the above steps:

  • Try a different bulb – Use a known compatible dimmable LED.
  • Reset and recalibrate: Use the Lightwave Link Plus app to reset and recalibrate the dimmer.
  • Check Wiring and Load – Ensure all connections are secure and that the load requirements are met. Refer to the minimum and maximum load specifications in this article here.
  • Contact Support – If flickering persists, reach out to Lightwave Tech Support for further troubleshooting.