Installation Guidance & Manuals
      Back to home
      1. Help Center
      2. Installation Guidance & Manuals

      LP84 Smart Dimmable Driver - Manuals, Specifications & Wiring

      The Smart Dimmable drivers provide an excellent solution for controlling LED lighting strips

      The new Smart Dimmable drivers provide an excellent solution for controlling LED lighting strips directly through our app or wirelessly via battery-operated scene selectors, additional dimmer gangs, motion sensors, and third-party applications. Supported LED types include standard White, RGB (Red, Green, Blue), RGBW (which adds White to the RGB mix), and CCT (Correlated Color Temperature) for adjustable color temperature options.

       

      LP84V24P100W - 24V 100W Class II - CLICK HERE FOR MANUALS 

      • 100W Total combined power across all outputs​
      • Each output can drive up to 100W LED individually​
      • LED type selection and output assignment setup during the Linking process​
      • Class II device - Does not require a CPC/PE wire

       

      LP84V24P200W – 24V 200W Class I​ - CLICK HERE FOR MANUALS

      • 200W Total combined power across all outputs​
      • Each output can drive up to 100W LED individually​
      • LED type selection and output assignment setup during the Linking process​
      • Class I device - Does require a CPC/PE wire!

       

       

      Specifications:

      • AC 230V input, DC 24V Constant Voltage output, compatible with most 24V CV LEDs​
      • Manual Control typically from our Wire free Scene selector's (LP51,LP52,LP53,LP54) or independently wired or spare gangs of our wired Dimmers (LP21,LP22,LP23,LP24)  
      • Do NOT wire this product in circuit with a smart dimmer
      • DC Dimming with flicker free 750Hz refresh rate​
      • Supported LED types (White, RGB, RGBW and CCT Tuneable Colour Temperature)​
      • Dimming Profile adjustment and energy monitoring​
      • High efficiency, low stand-by power​
      • SELV compliant​
      • Over current and over temperature protection​
      • Dynamic output assignment at RF pairing for easy installation

       

      Wiring Guidance:

       

      • Supply the device from a fused spur switch or a standard plug​
      • The function of the outputs depends on the LED type selected in the app and the assigned output function e.g. for CCT mode the outputs can be set to be either WarmWhite or CoolWhite

       

      RGBWW Guidance

      2 Smart dimmable drivers are required to achieve RGBWW.

      One driver will be required for the RGB Components and a second one for the CCT  White components

      An automation is required to link the 2 drivers together 

      This option also allows for a Longer LED Run

       

       

      If assistance on how to link and Control the LP84 Smart Dimmable Driver please Click Here