Lightwave Dimmers will only work with dimmable and compatible LEDs
It is not possible to have conventional on/off light switches with LightwaveRF. In most installations, there is not a neutral cable to the back box of a lightswitch which would be required to keep power to the radio receiver to keep remote functionality. If on/off switching is required, then this can be achieved by putting the lighting circuit into an in-line relay (which are designed to fit in a standard ceiling rose). This relay switch can then be paired to a LightwaveRF Wireless On/Off Dimmer Switch to give on/off operation. The product codes required would be:
-JSJSLW821 - 500W in-line relay
JSJSLW830 - 3000W in-line relay -JSJSLW201 - 1 Gang wire free switch OR JSJSLW205 - 1 Gang wire free switch in a White Plastic finish.